NI IMAQ Error Code 一览表
-1074397183
IMG_ERR_NCAP
NI-IMAQ cannot perform the requested operation.
-1074397182
IMG_ERR_OVRN
Too many interfaces open.
-1074397181
IMG_ERR_EMEM
Not enough memory to perform the operation.
-1074397180
IMG_ERR_OSER
Operating system error occurred.
-1074397179
IMG_ERR_PAR1
Function-specific; see function description.
-1074397178
IMG_ERR_PAR2
Function-specific; see function description.
-1074397177
IMG_ERR_PAR3
Function-specific; see function description.
-1074397176
IMG_ERR_PAR4
Function-specific; see function description.
-1074397175
IMG_ERR_PAR5
Function-specific; see function description.
-1074397174
IMG_ERR_PAR6
Function-specific; see function description.
-1074397173
IMG_ERR_PAR7
Function-specific; see function description.
-1074397172
IMG_ERR_MXBF
Too many buffers already allocated.
-1074397171
IMG_ERR_DLLE
DLL internal error; bad logic state.
-1074397170
IMG_ERR_BSIZ
Buffer size used is too small for minimum acquisition frame.
-1074397169
IMG_ERR_MXBI
Exhausted buffer IDs.
-1074397168
IMG_ERR_ELCK
Operating system unable to lock the requested amount of memory.
-1074397167
IMG_ERR_DISE
Error releasing the image buffer.
-1074397166
IMG_ERR_BBUF
Bad buffer pointer in list.
-1074397165
IMG_ERR_NLCK
Buffer list is not locked for this acquisition.
-1074397164
IMG_ERR_NCAM
No camera defined for this channel.
-1074397163
IMG_ERR_BINT
The passed in interface or session is invalid.
-1074397162
IMG_ERR_BROW
The bytes per row value is less than region of interest.
-1074397161
IMG_ERR_BROI
Region of interest is larger than the acquisition area.
-1074397160
IMG_ERR_BCMF
Camera file is missing or corrupted.
-1074397159
IMG_ERR_NVBL
The hardware is incapable of performing the requested action.
-1074397158
IMG_ERR_NCFG
No buffers configured for session.
-1074397157
IMG_ERR_BBLF
Buffer list does not contain a valid final command.
-1074397156
IMG_ERR_BBLE
Buffer list contains an invalid command.
-1074397155
IMG_ERR_BBLB
One or more of the buffers in the buffer list is not configured.
-1074397154
IMG_ERR_NAIP
No acquisition in progress.
-1074397153
IMG_ERR_VLCK
Cannot detect recognizable video source.
-1074397152
IMG_ERR_BDMA
Bad DMA transfer.
-1074397151
IMG_ERR_AIOP
Cannot perform request; acquisition currently in progress.
-1074397150
IMG_ERR_TIMO
A timeout error occurred while waiting for the specified event. If waiting for an image, verify that all video data is acquired within the timeout period. If waiting for a signal, verify that the signal assertion occurs within the timeout period.
-1074397149
IMG_ERR_NBUF
No buffers available; too early in acquisition.
-1074397148
IMG_ERR_ZBUF
The buffer has a size of zero.
-1074397147
IMG_ERR_HLPR
Parameter value set lower than valid range.
-1074397146
IMG_ERR_BTRG
Trigger loopback problem; cannot drive with action enabled.
-1074397145
IMG_ERR_NINF
No interface found.
-1074397144
IMG_ERR_NDLL
Unable to load DLL.
-1074397143
IMG_ERR_NFNC
Unable to find API function in DLL.
-1074397142
IMG_ERR_NOSR
Unable to allocate system resources.
-1074397141
IMG_ERR_BTAC
No trigger action; acquisition will time out.
-1074397140
IMG_ERR_FIFO
FIFO overflow caused acquisition to halt.
-1074397139
IMG_ERR_MLCK
Operating system denied request to lock down memory.
-1074397138
IMG_ERR_ILCK
Interface locked.
-1074397137
IMG_ERR_NEPK
No pixel clock detected from camera.
-1074397136
IMG_ERR_SCLM
Field scaling mode not supported.
-1074397135
IMG_ERR_SCC1
Channel not set to 1 when using StillColor RGB acquisition.
-1074397134
IMG_ERR_SMALLALLOC
Error during small buffer allocation.
-1074397133
IMG_ERR_ALLOC
Error during large buffer allocation.
-1074397132
IMG_ERR_BADCAMTYPE
This camera type is not supported by this hardware.
-1074397131
IMG_ERR_BADPIXTYPE
Camera not supported; must be an 8-bit camera.
-1074397130
IMG_ERR_BADCAMPARAM
Bad camera parameter in configuration file.
-1074397129
IMG_ERR_PALKEYDTCT
Unable to recognize color component in PAL signal.
-1074397128
IMG_ERR_BFRQ
Bad clock frequency.
-1074397127
IMG_ERR_BITP
Bad interface type.
-1074397126
IMG_ERR_HWNC
Hardware not capable of supporting this operation.
-1074397125
IMG_ERR_SERIAL
Serial port error.
-1074397124
IMG_ERR_MXPI
No more pulse IDs are available. Dispose of an existing pulse first.
-1074397123
IMG_ERR_BPID
Bad pulse ID.
-1074397122
IMG_ERR_NEVR
DLL internal error; bad logic state.
-1074397121
IMG_ERR_SERIAL_TIMO
Unable to perform the requested serial operation within the timeout period.
-1074397120
IMG_ERR_PG_TOO_MANY
Too many pattern generation transitions defined.
-1074397119
IMG_ERR_PG_BAD_TRANS
Bad pattern generation transition time.
-1074397118
IMG_ERR_PLNS
Pulse not started.
-1074397117
IMG_ERR_BPMD
Bad pulse mode.
-1074397116
IMG_ERR_NSAT
This attribute cannot be set.
-1074397115
IMG_ERR_HYBRID
Cannot mix system and onboard memory buffers.
-1074397114
IMG_ERR_BADFILFMT
Pixel depth not supported with this file format.
-1074397113
IMG_ERR_BADFILEXT
File extension is not supported.
-1074397112
IMG_ERR_NRTSI
Too many RTSI triggers mapped; you can use only four RTSI lines at once.
-1074397111
IMG_ERR_MXTRG
Exhausted trigger resources.
-1074397110
IMG_ERR_MXRC
Exhausted resources.
-1074397109
IMG_ERR_OOR
Parameter out of range.
-1074397108
IMG_ERR_NPROG
FPGA not programmed.
-1074397107
IMG_ERR_NEOM
Not enough onboard memory to perform the operation.
-1074397106
IMG_ERR_BDTYPE
Bad display type; buffer cannot be displayed with imgPlot.
-1074397105
IMG_ERR_THRDACCDEN
Thread denied access to function.
-1074397104
IMG_ERR_BADFILWRT
Could not write the file.
-1074397103
IMG_ERR_AEXM
This buffer is currently protected. Release it to allow new data to be written.
-1074397102
IMG_ERR_BAD_LUT_TYPE
The LUT type is invalid.
-1074397101
IMG_ERR_ATTRIBUTE_NOT_READABLE
The selected attribute is not readable.
-1074397100
IMG_ERR_BOARD_NOT_SUPPORTED
This version of NI-IMAQ does not support this device.
-1074397099
IMG_ERR_BAD_FRAME_FIELD
The value of IMG_ATTR_FRAME_FIELD is invalid.
-1074397098
IMG_ERR_INVALID_ATTRIBUTE
The requested attribute is invalid.
-1074397097
IMG_ERR_BAD_LINE_MAP
The physical data lines are incorrectly mapped to bit values.
-1074397095
IMG_ERR_BAD_CHANNEL
The requested channel is invalid for this device.
-1074397094
IMG_ERR_BAD_CHROMA_FILTER
The value of IMG_ATTR_CHROMA_FILTER is invalid.
-1074397093
IMG_ERR_BAD_SCALE
The value of IMG_ATTR_HSCALE or IMG_ATTR_VSCALE is invalid.
-1074397091
IMG_ERR_BAD_TRIGGER_MODE
The requested triggering mode is invalid.
-1074397090
IMG_ERR_BAD_CLAMP_START
The clamp start value is invalid.
-1074397089
IMG_ERR_BAD_CLAMP_STOP
The requested clamp stop value is invalid.
-1074397088
IMG_ERR_BAD_BRIGHTNESS
The requested brightness level is out of range.
-1074397087
IMG_ERR_BAD_CONTRAST
The requested contrast level is out of range.
-1074397086
IMG_ERR_BAD_SATURATION
The requested saturation level is out of range.
-1074397085
IMG_ERR_BAD_TINT
The requested tint level is out of range.
-1074397084
IMG_ERR_BAD_HUE_OFF_ANGLE
The requested hue offset angle is out of range.
-1074397083
IMG_ERR_BAD_ACQUIRE_FIELD
The field requested to be acquired is invalid.
-1074397082
IMG_ERR_BAD_LUMA_BANDWIDTH
The requested luma bandwidth value is invalid.
-1074397081
IMG_ERR_BAD_LUMA_COMB
The requested luma comb setting is invalid.
-1074397080
IMG_ERR_BAD_CHROMA_PROCESS
The requested chroma processing value is invalid.
-1074397079
IMG_ERR_BAD_CHROMA_BANDWIDTH
The requested chroma bandwidth value is invalid.
-1074397078
IMG_ERR_BAD_CHROMA_COMB
The requested chroma comb setting value is invalid.
-1074397077
IMG_ERR_BAD_RGB_CORING
The requested minimum level of saturation (coring) for the RGB color space is invalid.
-1074397076
IMG_ERR_BAD_HUE_REPLACE_VALUE
The requested HSL hue replacement value is out of range.
-1074397075
IMG_ERR_BAD_RED_GAIN
The requested red gain value is out of range.
-1074397074
IMG_ERR_BAD_GREEN_GAIN
The requested green gain value is out of range.
-1074397073
IMG_ERR_BAD_BLUE_GAIN
The requested blue gain value is out of range.
-1074397072
IMG_ERR_BAD_START_FIELD
The requested start field value is invalid.
-1074397071
IMG_ERR_BAD_TAP_DIRECTION
The direction of the tap scan is invalid.
-1074397070
IMG_ERR_BAD_MAX_IMAGE_RECT
The maximum image rectangle value is invalid.
-1074397069
IMG_ERR_BAD_TAP_TYPE
The tap configuration is invalid.
-1074397068
IMG_ERR_BAD_SYNC_RECT
The synchronization rectangle is invalid.
-1074397067
IMG_ERR_BAD_ACQWINDOW_RECT
The requested acquisition window is invalid.
-1074397066
IMG_ERR_BAD_HSL_CORING
The requested minimum level of saturation (coring) for the HSL color space is out of range.
-1074397065
IMG_ERR_BAD_TAP_0_VALID_RECT
The rectangle defined for Tap 0 is invalid.
-1074397064
IMG_ERR_BAD_TAP_1_VALID_RECT
The rectangle defined for Tap 1 is invalid.
-1074397063
IMG_ERR_BAD_TAP_2_VALID_RECT
The rectangle defined for Tap 2 is invalid.
-1074397062
IMG_ERR_BAD_TAP_3_VALID_RECT
The rectangle defined for Tap 3 is invalid.
-1074397061
IMG_ERR_BAD_TAP_RECT
The tap rectangle is invalid.
-1074397060
IMG_ERR_BAD_NUM_TAPS
The number of taps is invalid.
-1074397059
IMG_ERR_BAD_TAP_NUM
The tap number is invalid.
-1074397058
IMG_ERR_BAD_QUAD_NUM
The scarab quadrant number is invalid.
-1074397057
IMG_ERR_BAD_NUM_DATA_LINES
The number of data lines requested is invalid for this image acquisition device.
-1074397056
IMG_ERR_BAD_BITS_PER_COMPONENT
The bits-per-component value is invalid.
-1074397055
IMG_ERR_BAD_NUM_COMPONENTS
The number of components value is invalid.
-1074397054
IMG_ERR_BAD_BIN_THRESHOLD_LOW
The requested lower binary threshold value is out of range.
-1074397053
IMG_ERR_BAD_BIN_THRESHOLD_HIGH
The requested upper binary threshold value is out of range.
-1074397052
IMG_ERR_BAD_BLACK_REF_VOLT
The requested black reference voltage value is out of range.
-1074397051
IMG_ERR_BAD_WHITE_REF_VOLT
The requested white reference voltage value is out of range.
-1074397050
IMG_ERR_BAD_FREQ_STD
The video standard frequency value selected for the 6431 chip is invalid.
-1074397049
IMG_ERR_BAD_HDELAY
The HDELAY value is out of range.
-1074397048
IMG_ERR_BAD_LOCK_SPEED
The setting for lock speed is invalid.
-1074397047
IMG_ERR_BAD_BUFFER_LIST
The buffer list is invalid.
-1074397046
IMG_ERR_BOARD_NOT_INITIALIZED
The image aquisition device is not yet initialized.
-1074397045
IMG_ERR_BAD_PCLK_SOURCE
The requested pixel clock source is invalid for this image acquisition device.
-1074397044
IMG_ERR_BAD_VIDEO_LOCK_CHANNEL
The selected video timing signal source is invalid for this image acquisition device.
-1074397043
IMG_ERR_BAD_LOCK_SEL
The selected lock mode is invalid.
-1074397042
IMG_ERR_BAD_BAUD_RATE
The selected baud rate is invalid for this image acquisition device.
-1074397041
IMG_ERR_BAD_STOP_BITS
The requested serial stop bits setting is invalid for this image acquisition device.
-1074397040
IMG_ERR_BAD_DATA_BITS
The requested serial data bits setting is invalid for this image acquisition device.
-1074397039
IMG_ERR_BAD_PARITY
The requested serial parity setting is invalid for this image acquisition device.
-1074397038
IMG_ERR_TERM_STRING_NOT_FOUND
The requested serial termination string was not found in the returned buffer.
-1074397037
IMG_ERR_SERIAL_READ_TIMEOUT
The serial read did not complete within the specified timeout period.
-1074397036
IMG_ERR_SERIAL_WRITE_TIMEOUT
The serial write operation could not execute within the specified timeout period.
-1074397035
IMG_ERR_BAD_SYNCHRONICITY
The async setting in imgSessionAcquire is invalid.
-1074397034
IMG_ERR_BAD_INTERLACING_CONFIG
This tap configuration cannot be interlaced.
-1074397032
IMG_ERR_BAD_CHIP_CODE
The requested chip code is invalid. Could not find a matching chip.
-1074397031
IMG_ERR_LUT_NOT_PRESENT
The LUT chip does not exist on this image acquisition device.
-1074397030
IMG_ERR_DSPFILTER_NOT_PRESENT
The DSP filter does not exist on this image acquisition device.
-1074397029
IMG_ERR_DEVICE_NOT_FOUND
The image acquisition device was not found.
-1074397028
IMG_ERR_ONBOARD_MEM_CONFIG
An error occurred during onboard memory configuration.
-1074397027
IMG_ERR_BAD_POINTER
The pointer provided is either NULL when it should not be, or is non-NULL when it should be NULL.
-1074397026
IMG_ERR_BAD_BUFFER_LIST_INDEX
The requested buffer list index is invalid.
-1074397025
IMG_ERR_INVALID_BUFFER_ATTRIBUTE
The requested buffer attribute is invalid.
-1074397024
IMG_ERR_INVALID_BUFFER_PTR
The requested buffer was not created by the NI-IMAQ driver software.
-1074397023
IMG_ERR_BUFFER_LIST_ALREADY_LOCKED
This image acquisition device already has a buffer list locked down in memory.
-1074397022
IMG_ERR_BAD_DEVICE_TYPE
The type of image acquisition device requested is invalid.
-1074397021
IMG_ERR_BAD_BAR_SIZE
The size of one or more Base Address Register windows is incorrect.
-1074397019
IMG_ERR_NO_VALID_COUNTER_RECT
The selected region of interest is not valid for the camera tap configuration.
-1074397018
IMG_ERR_ACQ_STOPPED
The wait terminated because the acquisition stopped.
-1074397017
IMG_ERR_BAD_TRIGGER_ACTION
The requested trigger action is invalid.
-1074397016
IMG_ERR_BAD_TRIGGER_POLARITY
The trigger polarity is invalid.
-1074397015
IMG_ERR_BAD_TRIGGER_NUMBER
The requested trigger line is invalid. Please verify that this trigger line exists and is properly connected to your device.
-1074397014
IMG_ERR_BUFFER_NOT_AVAILABLE
The requested buffer has been overwritten and is no longer available.
-1074397012
IMG_ERR_BAD_PULSE_ID
The pulse ID is invalid.
-1074397011
IMG_ERR_BAD_PULSE_TIMEBASE
The requested timebase for the pulse is invalid.
-1074397010
IMG_ERR_BAD_PULSE_GATE
The gate signal for the pulse is invalid.
-1074397009
IMG_ERR_BAD_PULSE_GATE_POLARITY
The polarity of the pulse gate signal is invalid.
-1074397008
IMG_ERR_BAD_PULSE_OUTPUT
The output signal for the pulse is invalid.
-1074397007
IMG_ERR_BAD_PULSE_OUTPUT_POLARITY
The requested polarity of the pulse output signal is invalid.
-1074397006
IMG_ERR_BAD_PULSE_MODE
The requested pulse mode is invalid.
-1074397005
IMG_ERR_NOT_ENOUGH_RESOURCES
There are not enough system resources to complete the requested option.
-1074397004
IMG_ERR_INVALID_RESOURCE
The requested resource is invalid.
-1074397003
IMG_ERR_BAD_FVAL_ENABLE
The selected FVAL enable mode is invalid.
-1074397002
IMG_ERR_BAD_WRITE_ENABLE_MODE
The specified combination of enable lines is invalid.
-1074397001
IMG_ERR_COMPONENT_MISMATCH
Internal Error: The installed components of the NI-IMAQ driver software are incompatible. Reinstall NI-IMAQ.
-1074397000
IMG_ERR_FPGA_PROGRAMMING_FAILED
Internal Error: The attempt to download the program to an FPGA was unsuccessful.
-1074396999
IMG_ERR_CONTROL_FPGA_FAILED
Internal Error: The control FPGA did not initialize properly.
-1074396998
IMG_ERR_CHIP_NOT_READABLE
Internal Error: Attempted to read a write-only chip.
-1074396997
IMG_ERR_CHIP_NOT_WRITABLE
Internal Error: Attempted to write to a read-only chip.
-1074396996
IMG_ERR_I2C_BUS_FAILED
Internal Error: The I2C bus did not respond correctly.
-1074396995
IMG_ERR_DEVICE_IN_USE
The requested image acquisition device is already in use.
-1074396994
IMG_ERR_BAD_TAP_DATALANES
The requested data lanes on a particular tap are invalid.
-1074396993
IMG_ERR_BAD_VIDEO_GAIN
The requested video gain value is out of range.
-1074396992
IMG_ERR_VHA_MODE_NOT_ALLOWED
The current device configuration does not allow VHA mode.
-1074396991
IMG_ERR_BAD_TRACKING_SPEED
The color video tracking speed is invalid.
-1074396990
IMG_ERR_BAD_COLOR_INPUT_SELECT
The selected input connector is not valid.
-1074396989
IMG_ERR_BAD_HAV_OFFSET
The offset value for the Horizontal Active Video color decoder setting is invalid.
-1074396988
IMG_ERR_BAD_HS1_OFFSET
The Horizontal Sync 1offset value for the color decoder is invalid.
-1074396987
IMG_ERR_BAD_HS2_OFFSET
The Horizontal Sync 2 offset value for the color decoder is invalid.
-1074396986
IMG_ERR_BAD_IF_CHROMA
The chroma IF compensation setting is invalid.
-1074396985
IMG_ERR_BAD_COLOR_OUTPUT_FORMAT
The color output format is invalid.
-1074396984
IMG_ERR_BAD_SAMSUNG_SCHCMP
The phase constant specified for the color decoder is invalid.
-1074396983
IMG_ERR_BAD_SAMSUNG_CDLY
The chroma path group delay setting is invalid.
-1074396982
IMG_ERR_BAD_SECAM_DETECT
The SECAM detection method is invalid.
-1074396981
IMG_ERR_BAD_FSC_DETECT
The FSC detection method is invalid.
-1074396980
IMG_ERR_BAD_SAMSUNG_CFTC
The chroma frequency tracking time constant is invalid.
-1074396979
IMG_ERR_BAD_SAMSUNG_CGTC
The chroma gain tracking time constant setting is invalid.
-1074396978
IMG_ERR_BAD_SAMSUNG_SAMPLE_RATE
The pixel sampling rate is invalid.
-1074396977
IMG_ERR_BAD_SAMSUNG_VSYNC_EDGE
The requested VSYNC edge to synchronize with is invalid.
-1074396976
IMG_ERR_SAMSUNG_LUMA_GAIN_CTRL
The method used to control the gain setting for luminance is invalid.
-1074396975
IMG_ERR_BAD_SET_COMB_COEF
The chrominance comb coefficients setting is invalid.
-1074396974
IMG_ERR_SAMSUNG_CHROMA_TRACK
The method used to track chrominance is invalid.
-1074396973
IMG_ERR_SAMSUNG_DROP_LINES
The algorithm for dropping video lines is invalid.
-1074396972
IMG_ERR_VHA_OPTIMIZATION_NOT_ALLOWED
VHA optimization is not applicable for the current configuration.
-1074396971
IMG_ERR_BAD_PG_TRANSITION
A pattern generation is invalid.
-1074396970
IMG_ERR_TOO_MANY_PG_TRANSITIONS
The number of pattern generation transitions exceeds the maximum allowed for the selected image acquisition device.
-1074396969
IMG_ERR_BAD_CL_DATA_CONFIG
The data configuration for the channel link chip is invalid.
-1074396968
IMG_ERR_BAD_OCCURRENCE
The requested occurrence is invalid.
-1074396967
IMG_ERR_BAD_PG_MODE
The pattern generation mode is invalid.
-1074396966
IMG_ERR_BAD_PG_SOURCE
The pattern generation source signal is invalid.
-1074396965
IMG_ERR_BAD_PG_GATE
The pattern generation gate signal is invalid.
-1074396964
IMG_ERR_BAD_PG_GATE_POLARITY
The pattern generation gate polarity is invalid.
-1074396963
IMG_ERR_BAD_PG_WAVEFORM_INITIAL_STATE
The initial state for the pattern generation waveform is invalid.
-1074396962
IMG_ERR_INVALID_CAMERA_ATTRIBUTE
The requested camera attribute is invalid.
-1074396961
IMG_ERR_BOARD_CLOSED
The request failed because the device is closed.
-1074396960
IMG_ERR_FILE_NOT_FOUND
The requested file could not be found.
-1074396959
IMG_ERR_BAD_1409_DSP_FILE
The dspfilter1409.bin file is corrupt or missing.
-1074396958
IMG_ERR_BAD_SCARABXCV200_32_FILE
The scarabXCV200.bin file is corrupt or missing.
-1074396957
IMG_ERR_BAD_SCARABXCV200_16_FILE
The scarab16bit.bin file is corrupt or missing.
-1074396956
IMG_ERR_BAD_CAMERA_LINK_FILE
The Camera Link FPGA bin file is corrupt or missing.
-1074396955
IMG_ERR_BAD_1411_CSC_FILE
The colorspace.bin file is corrupt or missing.
-1074396954
IMG_ERR_BAD_ERROR_CODE
The error code passed into imgShowError is unknown.
-1074396953
IMG_ERR_DRIVER_TOO_OLD
The image acquisition device requires a newer version of the NI-IMAQ driver software.
-1074396952
IMG_ERR_INSTALLATION_CORRUPT
The NI-IMAQ driver software installation is corrupt.
-1074396951
IMG_ERR_NO_ONBOARD_MEMORY
NI-IMAQ cannot perform an onboard acquisition because there is no onboard memory.
-1074396950
IMG_ERR_BAD_BAYER_PATTERN
The Bayer pattern specified is invalid.
-1074396949
IMG_ERR_CANNOT_INITIALIZE_BOARD
The image acquisition device is not operating correctly and cannot be initialized.
-1074396948
IMG_ERR_CALIBRATION_DATA_CORRUPT
The stored calibration data has been corrupted.
-1074396947
IMG_ERR_DRIVER_FAULT
NI-IMAQ attempted to perform an illegal operation.
-1074396946
IMG_ERR_ADDRESS_OUT_OF_RANGE
NI-IMAQ attempted to access a chip beyond the applicable addressable range.
-1074396945
IMG_ERR_ONBOARD_ACQUISITION
The requested operation is not valid for onboard acquisitions.
-1074396944
IMG_ERR_NOT_AN_ONBOARD_ACQUISITION
The requested operation is valid only for onboard acquisitions.
-1074396943
IMG_ERR_BOARD_ALREADY_INITIALIZED
NI-IMAQ attempted to call an initialization function on an image acquisition device that was already initialized.
-1074396942
IMG_ERR_NO_SERIAL_PORT
The image acquisition device does not have a serial port. Serial functions are invalid.
-1074396941
IMG_ERR_BAD_VENABLE_GATING_MODE
The VENABLE gating mode selection is invalid.
-1074396940
IMG_ERR_BAD_1407_LUT_FILE
The lutfpga1407.bin file is corrupt or missing.
-1074396939
IMG_ERR_BAD_SYNC_DETECT_LEVEL
The synchronization signal detection level is out of range.
-1074396938
IMG_ERR_BAD_1405_GAIN_FILE
The gain1405.bin file is corrupt or missing.
-1074396937
IMG_ERR_CLAMP_DAC_NOT_PRESENT
The image acquisition device does not have a clamp DAC.
-1074396936
IMG_ERR_GAIN_DAC_NOT_PRESENT
The image acquisition device does not have a gain DAC.
-1074396935
IMG_ERR_REF_DAC_NOT_PRESENT
The image acquisition device does not have a reference DAC.
-1074396934
IMG_ERR_BAD_SCARABXC2S200_FILE
The scarabXC2S200.bin file is corrupt or missing.
-1074396933
IMG_ERR_BAD_LUT_GAIN
The specified LUT gain is invalid.
-1074396932
IMG_ERR_BAD_MAX_BUF_LIST_ITER
The requested number of buffer lists for an onboard acquisition is invalid.
-1074396931
IMG_ERR_BAD_PG_LINE_NUM
The requested line number for pattern generation is invalid.
-1074396930
IMG_ERR_BAD_BITS_PER_PIXEL
The requested number of bits per pixel is invalid.
-1074396929
IMG_ERR_TRIGGER_ALARM
Triggers are coming in too fast to handle them and maintain system responsiveness. Check for noise on your trigger line.
-1074396928
IMG_ERR_BAD_SCARABXC2S200_03052009_FILE
The scarabXC2S200_03052009.bin file is corrupt or missing.
-1074396927
IMG_ERR_LUT_CONFIG
Internal Error: An error occurred while configuring the LUT.
-1074396926
IMG_ERR_CONTROL_FPGA_REQUIRES_NEWER_DRIVER
A firmware update has been applied to the device. The image acquisition device requires a newer version of the NI-IMAQ driver software to work with the update.
-1074396925
IMG_ERR_CONTROL_FPGA_PROGRAMMING_FAILED
An error occurred while updating the firmware on the device.
-1074396924
IMG_ERR_BAD_TRIGGER_SIGNAL_LEVEL
The trigger line does not support the requested signaling level.
-1074396923
IMG_ERR_CAMERA_FILE_REQUIRES_NEWER_DRIVER
This camera file requires a newer version of NI-IMAQ.
-1074396922
IMG_ERR_DUPLICATED_BUFFER
An image cannot be placed in the same buffer list more than once.
-1074396921
IMG_ERR_NO_ERROR
No error
-1074396920
IMG_ERR_INTERFACE_NOT_SUPPORTED
The camera file does not support the current interface type.
-1074396919
IMG_ERR_BAD_PCLK_POLARITY
The requested polarity for the pixel clock is invalid.
-1074396918
IMG_ERR_BAD_ENABLE_POLARITY
The requested polarity for the enable line is invalid.
-1074396917
IMG_ERR_BAD_PCLK_SIGNAL_LEVEL
The requested signaling level for the pixel clock is invalid.
-1074396916
IMG_ERR_BAD_ENABLE_SIGNAL_LEVEL
The requested signaling level for the enable line is invalid.
-1074396915
IMG_ERR_BAD_DATA_SIGNAL_LEVEL
The requested signaling level for the data lines is invalid.
-1074396914
IMG_ERR_BAD_CTRL_SIGNAL_LEVEL
The requested signaling level for the control lines is invalid.
-1074396913
IMG_ERR_BAD_WINDOW_HANDLE
The requested window handle is invalid.
-1074396912
IMG_ERR_CANNOT_WRITE_FILE
Cannot open the requested file for writing.
-1074396911
IMG_ERR_CANNOT_READ_FILE
Cannot open the requested file for reading.
-1074396910
IMG_ERR_BAD_SIGNAL_TYPE
Cannot wait on the requested signal.
-1074396909
IMG_ERR_BAD_SAMPLES_PER_LINE
The specified number of samples per line is invalid.
-1074396908
IMG_ERR_BAD_SAMPLES_PER_LINE_REF
The specified reference value for samples per line is invalid.
-1074396907
IMG_ERR_USE_EXTERNAL_HSYNC
The current video signal requires an external HSYNC to be used to lock the signal.
-1074396906
IMG_ERR_BUFFER_NOT_ALIGNED
An image buffer is not properly aligned. All image buffers must be aligned to a 4-byte boundary.
-1074396905
IMG_ERR_ROWPIXELS_TOO_SMALL
The number of pixels per row is less than the region of interest width.
-1074396904
IMG_ERR_ROWPIXELS_NOT_ALIGNED
The number of pixels per row is not properly aligned. The total number of bytes per row must be aligned to a 4-byte boundary.
-1074396903
IMG_ERR_ROI_WIDTH_NOT_ALIGNED
The ROI width is not properly aligned. The total number of bytes bounded by the ROI width must be aligned to a 4-byte boundary.
-1074396902
IMG_ERR_LINESCAN_NOT_ALLOWED
Linescan mode is not valid for this tap configuration.
-1074396901
IMG_ERR_INTERFACE_FILE_REQUIRES_NEWER_DRIVER
This interface file requires a newer version of NI-IMAQ.
-1074396900
IMG_ERR_BAD_SKIP_COUNT
The requested skip count value is out of range.
-1074396899
IMG_ERR_BAD_NUM_X_ZONES
The number of X zones in the tap configuration of the camera is invalid.
-1074396898
IMG_ERR_BAD_NUM_Y_ZONES
The number of Y zones in the tap configuration of the camera is invalid.
-1074396897
IMG_ERR_BAD_NUM_TAPS_PER_X_ZONE
The number of taps per X zone in the tap configuration of the camera is invalid.
-1074396896
IMG_ERR_BAD_NUM_TAPS_PER_Y_ZONE
The number of taps per Y zone in the tap configuration of the camera is invalid.
-1074396895
IMG_ERR_BAD_TEST_IMAGE_TYPE
The requested test image type is invalid.
-1074396894
IMG_ERR_CANNOT_ACQUIRE_FROM_CAMERA
This firmware is not capable of acquiring from a camera.
-1074396893
IMG_ERR_BAD_CTRL_LINE_SOURCE
The source for the camera control line is invalid.
-1074396892
IMG_ERR_BAD_PIXEL_EXTRACTOR
The requested pixel extractor is invalid.
-1074396891
IMG_ERR_BAD_NUM_TIME_SLOTS
The requested number of time slots is invalid.
-1074396890
IMG_ERR_BAD_PLL_VCO_DIVIDER
The requested VCO divide down number is invalid. The only valid values are 2, 4, 8 and 16.
-1074396889
IMG_ERR_CRITICAL_TEMP
The device temperature exceeded the critical temperature threshold.
-1074396888
IMG_ERR_BAD_DPA_OFFSET
The requested dynamic phase aligner offset is invalid.
-1074396887
IMG_ERR_BAD_NUM_POST_TRIGGER_BUFFERS
The requested number of post trigger buffers is invalid.
-1074396886
IMG_ERR_BAD_DVAL_MODE
The requested DVAL mode is invalid.
-1074396885
IMG_ERR_BAD_TRIG_GEN_REARM_SOURCE
The requested trigger generator rearm source signal is invalid.
-1074396884
IMG_ERR_BAD_ASM_GATE_SOURCE
The requested ASM gate signal is invalid.
-1074396883
IMG_ERR_TOO_MANY_BUFFERS
The requested number of buffer list buffers is not supported by this image acquisition device.
-1074396882
IMG_ERR_BAD_TAP_4_VALID_RECT
The rectangle defined for Tap 4 is invalid.
-1074396881
IMG_ERR_BAD_TAP_5_VALID_RECT
The rectangle defined for Tap 5 is invalid.
-1074396880
IMG_ERR_BAD_TAP_6_VALID_RECT
The rectangle defined for Tap 6 is invalid.
-1074396879
IMG_ERR_BAD_TAP_7_VALID_RECT
The rectangle defined for Tap 7 is invalid.
-1074396878
IMG_ERR_FRONT_END_BANDWIDTH_EXCEEDED
The camera is providing image data faster than the image acquisition device can receive it.
-1074396877
IMG_ERR_BAD_PORT_NUMBER
The requested port number does not exist.
-1074396876
IMG_ERR_PORT_CONFIG_CONFLICT
The requested port cannot be cannot be configured due to a conflict with another port that is currently opened.
-1074396875
IMG_ERR_BITSTREAM_INCOMPATIBLE
The requested bitstream is not compatible with the image acquisition device.
-1074396874
IMG_ERR_SERIAL_PORT_IN_USE
The requested serial port is currently in use and is not accessible.
-1074396873
IMG_ERR_BAD_ENCODER_DIVIDE_FACTOR
The requested encoder divide factor is invalid.
-1074396872
IMG_ERR_ENCODER_NOT_SUPPORTED
Encoder support is not present for this image acquisition device. Please verify that this device is capable of handling encoder signals and that phase A and B are connected.
-1074396871
IMG_ERR_BAD_ENCODER_POLARITY
The requested encoder phase signal polarity is invalid.
-1074396870
IMG_ERR_BAD_ENCODER_FILTER
The requested encoder filter setting is invalid.
-1074396869
IMG_ERR_ENCODER_POSITION_NOT_SUPPORTED
This image acquisition device does not support reading the absolute encoder position.
-1074396868
IMG_ERR_IMAGE_IN_USE
The image appears to be in use. Please name the images differently to avoid this situation.
-1074396867
IMG_ERR_BAD_SCARABXL4000_FILE
The scarab.bin file is corrupt or missing.
-1074396866
IMG_ERR_BAD_CAMERA_ATTRIBUTE_VALUE
The requested camera attribute value is invalid. For numeric camera attributes, please ensure that the value is properly aligned and within the allowable range.
-1074396865
IMG_ERR_BAD_PULSE_WIDTH
The requested pulse width is invalid.
-1074396864
IMG_ERR_FPGA_FILE_NOT_FOUND
The requested FPGA bitstream file could not be found.
-1074396863
IMG_ERR_FPGA_FILE_CORRUPT
The requested FPGA bitstream file is corrupt.
-1074396862
IMG_ERR_BAD_PULSE_DELAY
The requested pulse delay is invalid.
-1074396861
IMG_ERR_BAD_PG_IDLE_SIGNAL_LEVEL
The pattern generation (PG) idle state is invalid. Camera control lines sourced from the PG unit must be all tristate or all non-tristate.
-1074396860
IMG_ERR_BAD_PG_WAVEFORM_IDLE_STATE
The idle state for the pattern generation waveform is invalid.
-1074396859
IMG_ERR_64_BIT_MEMORY_NOT_SUPPORTED
This device only supports acquiring into the 32-bit address space; however, portions of the image buffer list reside outside of 32-bit physical memory.
-1074396858
IMG_ERR_64_BIT_MEMORY_UPDATE_AVAILABLE
This 32-bit device is operating on a 64-bit OS with more than 3GB of physical memory. An update is available to allow acquisitions into 64-bit physical memory. Launch the updater from the menu in MAX: Tools»NI Vision»Update NI-IMAQ Device Firmware.
-1074396857
IMG_ERR_32_BIT_MEMORY_LIMITATION
This 32-bit device is operating on a 64-bit OS with more than 3GB of physical memory. This configuration could allocate 64-bit memory which is unsupported by the device. To solve this problem, reduce the amount of physical memory in the system.
-1074396856
IMG_ERR_KERNEL_NOT_LOADED
The kernel component of the driver, niimaqk.sys, is not loaded. Verify that an IMAQ device is in your system or reinstall the driver.
-1074396855
IMG_ERR_BAD_SENSOR_SHUTTER_PERIOD
The sensor shutter period is invalid. Check the horizontal and vertical shutter period values.
-1074396854
IMG_ERR_BAD_SENSOR_CCD_TYPE
The sensor CCD type is invalid.
-1074396853
IMG_ERR_BAD_SENSOR_PARTIAL_SCAN
The sensor partial scan mode is invalid.
-1074396852
IMG_ERR_BAD_SENSOR_BINNING
The sensor binning mode is invalid.
-1074396851
IMG_ERR_BAD_SENSOR_GAIN
The sensor gain value is invalid.
-1074396850
IMG_ERR_BAD_SENSOR_BRIGHTNESS
The sensor brightness value is invalid.
-1074396849
IMG_ERR_BAD_LED_STATE
The LED state is invalid.
-1074396848
IMG_ERR_64_BIT_NOT_SUPPORTED
The operation is not supported for 64-bit applications.
-1074396847
IMG_ERR_BAD_TRIGGER_DELAY
The requested trigger delay value is not supported.
-1074396846
IMG_ERR_LIGHTING_CURRENT_EXCEEDS_LIMITS
The configured lighting current level exceeds the hardware or user's configured limits.
-1074396845
IMG_ERR_LIGHTING_INVALID_MODE
The configured lighting mode is invalid.
-1074396844
IMG_ERR_LIGHTING_EXTERNAL_INVALID_MODE
The configured external lighting mode is invalid.
-1074396843
IMG_ERR_BAD_SENSOR_EXPOSURE
The sensor exposure time is invalid.
-1074396842
IMG_ERR_BAD_FRAME_RATE
The frame rate is invalid for the current configuration.
-1074396841
IMG_ERR_BAD_SENSOR_PARTIAL_SCAN_BINNING_COMBINATION
The partial scan mode / binning mode combination is invalid.
-1074396840
IMG_ERR_SOFTWARE_TRIGGER_NOT_CONFIGURED
The requested software trigger is not configured.
-1074396839
IMG_ERR_FREE_RUN_MODE_NOT_ALLOWED
Free-run mode is not allowed in the current configuration. This is typically caused by simultaneously enabling free-run mode and a triggered acquisition.
-1074396838
IMG_ERR_BAD_LIGHTING_RAMPUP
The lighting ramp-up delay is either less than the minimum value allowed or larger than the maximum time that the light is allowed to be on.
-1074396837
IMG_ERR_AFE_CONFIG_TIMEOUT
Internal Error: A write to the AFEConfig register did not complete properly.
-1074396836
IMG_ERR_LIGHTING_ARM_TIMEOUT
Internal Error: The arming of the lighting controller did not complete properly.
-1074396835
IMG_ERR_LIGHTING_SHORT_CIRCUIT
The Direct Drive lighting controller has detected an abnormal load condition, such as a short circuit. Correct the abnormal load condition before restarting the acquisition.
-1074396834
IMG_ERR_BAD_BOARD_HEALTH
The board health register has indicated an internal problem.
-1074396833
IMG_ERR_LIGHTING_BAD_CONTINUOUS_CURRENT_LIMIT
The requested continuous current limit for the lighting controller is less than the minimum allowed current level.
-1074396832
IMG_ERR_LIGHTING_BAD_STROBE_DUTY_CYCLE_LIMIT
The requested duty cycle limit for the lighting controller strobe mode is invalid.
-1074396831
IMG_ERR_LIGHTING_BAD_STROBE_DURATION_LIMIT
The requested duration limit for the lighting controller strobe mode is invalid.
-1074396830
IMG_ERR_BAD_LIGHTING_CURRENT_EXPOSURE_COMBINATION
The lighting current is invalid because the exposure time plus the lighting ramp-up time exceeds either the strobe duration limit or the strobe duty cycle limit.
-1074396829
IMG_ERR_LIGHTING_HEAD_CONFIG_NOT_FOUND
The configuration for the desired light head was not found.
-1074396828
IMG_ERR_LIGHTING_HEAD_DATA_CORRUPT
The data for the desired light head configuration is invalid or corrupt.
-1074396827
IMG_ERR_LIGHTING_ABORT_TIMEOUT
Internal Error: The abort of the lighting controller did not complete properly.
-1074396826
IMG_ERR_LIGHTING_BAD_STROBE_CURRENT_LIMIT
The requested strobe current limit for the lighting controller is less than the minimum allowed current.
-1074396825
IMG_ERR_DMA_ENGINE_UNRESPONSIVE
Internal Error: The DMA engine is unresponsive. Reboot the target. If the problem persists contact National Instruments.
-1074396824
IMG_ERR_IMAGE_NOT_32BYTE_ALIGNED
The image width is not a multiple of 32-bytes. The current configuration requires that the image width be a multiple of 32-bytes.
-1074396823
IMG_ERR_IMAGE_BORDER_NONZERO
The image border is not zero. The current configuration requires that the image have no border.
-1074396822
IMG_ERR_UNKNOWN_CAMERA_FILE
No valid camera file selected for this interface.
-1074396821
IMG_ERR_ONBOARD_DECODING_NOT_CHANGEABLE_DURING_ACQ
The Bayer pattern cannot be change to None or away from None while the acquisition is running and onboard Bayer decoding is enabled.
-1074396820
IMG_ERR_BAD_BAYER_GAIN_FOR_ONBOARD_DECODE
The specified Bayer gain is not supported when onboard Bayer decoding is enabled.
-1074396819
IMG_ERR_BAD_BAYER_PATTERN_FOR_ONBOARD_DECODE
The specified Bayer pattern is not supported when onboard Bayer decoding is enabled.
-1074396818
IMG_ERR_BAD_NUM_COMPONENTS_FOR_ONBOARD_DECODE
The number of components value in the camera file must be 1 when onboard Bayer decoding is enabled.
-1074396817
IMG_ERR_BAD_NUM_PHANTOM_COMPONENTS_FOR_ONBOARD_DECODE
The number of phantom components value in the camera file must be 0 when onboard Bayer decoding is enabled.
-1074396816
IMG_ERR_POCL_FAULT
The Power Over CameraLink circuitry has encountered an unexpected error.
-1074396815
IMG_ERR_POCL_VIDEO_LOCK
The Power Over CameraLink circuitry is unable to provide power and the device cannot detect a recognizable video source.
-1074396814
IMG_ERR_POCL_BAD_FUSE
The Power Over CameraLink circuitry cannot provide power due to a blown fuse.
-1074396813
IMG_ERR_POCL_NO_AUX_POWER
The Power Over CameraLink circuitry cannot provide power due to a missing auxilliary power connection
-1074396812
IMG_ERR_PULSE_UPDATE_NOT_SUPPORTED
This image acquisition device does not support updating pulses.
-1074396811
IMG_ERR_BAD_BITS_PER_COMPONENT_FOR_ONBOARD_DECODE
The bits per component value in the camera file must be less than 16 when onboard Bayer decoding is enabled.
-1074396810
IMG_ERR_IO_BOARD_NOT_PRESENT
The requested configuration requires the IO extension board, but the IO extension board is not connected.